Alvarion BreezeACCESS 900 Base Station Equipment

Technical Specification

Features:

Make: Alvarion
Model code: BreezeACCESS 900 Base Station Equipment

Additional info:

Alvarion BreezeACCESS 900 Base Station Equipment comprises of Base Station Shelf with Access Unit Modules, AU-E-BS 900 Access Unit, and Stand-Alone "Micro-Cell" Access Units.Base Station Shelf with Access Unit ModulesThe BS-SH Base Station chassis is a 19" chassis that contains up to seven (one redundant) BS-AU modules. The BS-AU Access Units can be synchronized to ensure optimal utilisation of the frequency spectrum available. The BS-SH chassis contains one power supply with an alternative second power supply for redundancy. The BS-PS power supply modules are powered from a -48 VDC or 110/230 VAC power source.The AU-E-BS 900 Access Unit model is comprised of an indoor module (BS-AU) and an AU-RE outdoor unit, which contains a radio module and an RF connector for a separate external antenna (the external antenna is sold separately to the unit).The AU-E-BS unit is available with 24dBm (HP-High Power), output power at the antenna port. A coaxial cable connects the indoor module to the outdoor unit and serves for the transmission of signals as well as for transferring power, management and control signals from the indoor module to the outdoor unit. Connectivity to the network is established through a standard IEEE 802.3 Ethernet 10BaseT (RJ 45) interface.Stand-Alone "Micro-Cell" Access UnitsThe Stand-Alone Access unit enables the coverage of a small customer base or an area with low customer density. The AU-E-NI-900 is comprised of an indoor stand-alone unit, which connects to an outdoor unit. The indoor part of the Access Unit, the AU-NI, is a stand-alone desktop or wall-mountable unit. In the AU-E-NI outdoor unit contains a radio module and an RF connector for a separate external antenna (the external antenna is sold separately to the unit).The AU-E-NI unit is available with 24dBm (HP-High Power) output power at the antenna port. A coaxial cable connects the indoor module to the outdoor unit and serves for the transmission of signals as well as for transferring power, management and control signals from the indoor module to the outdoor unit. Connectivity to the network is established through a standard IEEE 802.3 Ethernet 10BaseT (RJ 45) interface.

Contact manufacturer

Make	Alvarion
Category	Surveillance software products
Model code	BreezeACCESS 900 Base Station Equipment
Additional info	Alvarion BreezeACCESS 900 Base Station Equipment comprises of Base Station Shelf with Access Unit Modules, AU-E-BS 900 Access Unit, and Stand-Alone "Micro-Cell" Access Units. Base Station Shelf with Access Unit Modules The BS-SH Base Station chassis is a 19" chassis that contains up to seven (one redundant) BS-AU modules. The BS-AU Access Units can be synchronized to ensure optimal utilisation of the frequency spectrum available. The BS-SH chassis contains one power supply with an alternative second power supply for redundancy. The BS-PS power supply modules are powered from a -48 VDC or 110/230 VAC power source. The AU-E-BS 900 Access Unit model is comprised of an indoor module (BS-AU) and an AU-RE outdoor unit, which contains a radio module and an RF connector for a separate external antenna (the external antenna is sold separately to the unit). The AU-E-BS unit is available with 24dBm (HP-High Power), output power at the antenna port. A coaxial cable connects the indoor module to the outdoor unit and serves for the transmission of signals as well as for transferring power, management and control signals from the indoor module to the outdoor unit. Connectivity to the network is established through a standard IEEE 802.3 Ethernet 10BaseT (RJ 45) interface. Stand-Alone "Micro-Cell" Access Units The Stand-Alone Access unit enables the coverage of a small customer base or an area with low customer density. The AU-E-NI-900 is comprised of an indoor stand-alone unit, which connects to an outdoor unit. The indoor part of the Access Unit, the AU-NI, is a stand-alone desktop or wall-mountable unit. In the AU-E-NI outdoor unit contains a radio module and an RF connector for a separate external antenna (the external antenna is sold separately to the unit). The AU-E-NI unit is available with 24dBm (HP-High Power) output power at the antenna port. A coaxial cable connects the indoor module to the outdoor unit and serves for the transmission of signals as well as for transferring power, management and control signals from the indoor module to the outdoor unit. Connectivity to the network is established through a standard IEEE 802.3 Ethernet 10BaseT (RJ 45) interface.
Download PDF version