Analog Transmission Systems  (753)

The ComNet™ FVR11 video receiver detects an AM video signal on one multimode fiber optic cable. The receiver utilizes Automatic Gain Control (AGC) and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.

The LTC 4628 and LTC 4629 are a bidirectional transmission system designed to implement a complete CCTV system using a single optical fiber cable.  This system independently transmits a video signal from the camera location to the controller location, while simultaneously transmitting Allegiant Bi-Phase control code from the controller location to the camera location.  The video channel is compatible with monochrome or color cameras.  The data channel is compatible with control systems that utilize simplex RS-232 or RS-422 signals. Both units incorporate LED indicators to provide quick visual indication of the module performance.  The LTC 4629 Transceiver Series is also compatible with the ENV Series of Bosch AutoDome® Cameras that incorporate an integral fiber optic transceiver.

UTP / CAT 5 transmission, 16 channels, 16, Colour / monochrome, 1.4 km~ 2.4km, 482 x 44 x 170, 400 mA, 12V DC, 0 ~ +40, 20 ~ 80, 100-105 Ohm (Balanced)

Vigitron's MaxiiCopper Ethernet Extender family were presented live at the ISC West 2010 to demonstrate an easy transition from analogue to digital CCTV systems using the existing coax or UTP infrastructures. When deployed along with the MaxiiCopper Vi2401 Ethernet Extender at the remote end and the Vi2408 or Vi2416 hub at a central location, they establish a full-duplex, full-rate Ethernet connection up to 5,500 feet (1,680m) at 10 Base-T or 2,100 feet (640 m) at 100Base-T with the existing Coax cables. A pair of the MaxiiCopper Vi2301 Ethernet Extenders achieves the similar data rate and distance performance over the standard UTP wires. They are completely transparent to the IT networks and do not need any IP programming. These extenders are excellent for high network bandwidth requirements of Mega-pixel cameras or multiple IP cameras. Their high data rate balances the best possible network throughput and long-reach distance design. These products provide simple and cost-effective upgrade path for a wide range of security and IT applications. Vigitron is a leading manufacturer of innovative transmission solutions for the global security and IT market. Our products enable you to use your copper infrastructure for either analogue or IP CCTV systems at extended distances. We are committed to employing state of the art technology to offer the best products at exceptional value, accompanied by excellent customer service. We bring you the future now. For additional information on the advantages of Vigitron products, contact us at 888-574-8942, e-mail [email protected], or visit www.vigitron.com.

Video Input desdcription: 1 Vp-p 75 Ohm (BNCConnector).

ComNet FVR21/LV dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The unit incorporates a “Loss of Video” relay for each channel. Upon loss of video signal or optical fiber break, the normally closed relay opens. The module is ideal for CCTV installations and the rack mount version can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. The module utilises Manual Gain control.

Genie’s “Smart Cabling” Active Baluns are designed for use with Category 5e Unshielded Twisted Pair (UTP) cable. Each Transmitter and Receiver is supplied with a DC12V Power supply as standard and can transmit and receive full motion composite video signals up to 900 metres in Colour and 1800 metres inMonochrome.

ComNet FDC1M single channel fiber break detector is designed to detect and report a breakage or the loss of optical signal in either multimode fiber plants. Featuring a self-contained transmitter and receiver, the unit provides an optical output that is transmitted continuously through a customer-furnished fiber loop, where it returns to the internal receiver section. Should the optical path be lost through a deliberate or unintentional breakage of the fiber, relay contacts in the modem immediately change their state and report the loss of optical signal.

ComNet FVR10 single video receiver detects an AM video signal on one multimode optical fibre. The receiver utilises Manual Gain Control and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

The DVBus 8350 series digital video multiplexers and demultiplexers transmit and receive from 16 up to 58 high-quality video signals with full-duplex audio, data and telemetry over one single-mode fibre.  The DVBus 8350 is available for 16, 24, 32, 40, 48, and 56 video channels.  The DVBus 8350 system is suited for environmentally harsh applications such as traffic monitoring, incident management, video surveillance in city centres, airport security, etc. DVBus 8350 model has SM fibre type.  All DVBus 8050 equipment is SNM compatible.

Fibre Optic transmission, 8 channels, TX/RX, 8, 1, Digital, PAL, NTSC, 900, 128 x 71 x 190, < 12 W, 11 ~ 16 V DC, -40 ~ +74, 0 ~ 95, 1 Vpp, 75 Ohm

The ComNet™ CWFE100(X)POE/M Series 2-port media converters provide full-duplex fiber optic transmission of a single channel of 10/100 Mbps Ethernet data (10/100 BASE -TX) through multimode or single mode optical fiber.

The CNFE1CL1MC(-M) is designed to use existing CCTV cabling as effective Ethernet transmission media. The CNFE1CL1MC(-M) uses a standard RJ45 port for Ethernet data and gives the user a choice of a terminal block port for twisted pair or BNC for coaxial cable use.

The Vigitron Vi1004 is a passive transceiver hub that transmits video over unshielded twisted pair (UTP) wires, point-to-point, for distances up to 1000 feet (305 m)*.  It is used with Vigitron passive transceivers such as VB1001 to support "up-the-coax" PTZ signals.

The ComNet™ Ethernet internal mounted media converters are designed to transmit and receive 10/100 Mbps data over multimode or single mode optical fiber.

16 channel 19-inch rack mounting transceiver hub. For use with category 5, 5e or 6 UTP cable.

Full-motion video transceiver.  UTP-NVT 1 channel, passive comp. (NV-213A) or max. 914.4 m (3000 ft) with active (female) connector.  Transmits up to 229 m (750 ft) in combination with a passive component.  Transmits up to 1 km (3000 ft) with active receivers.  Frequency response: DC to 5 MHz.  No power required. 

The Vi1204VPD is a passive transceiver device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV instalations in a structured wiring environment.  It supports up to 4 cameras for up to 750 feet and is designed to be installed in the control room.  The Vi1204VPD receives low-voltage camera power from any third-party multioutput Class 2 power supply.  Each camera power output is equipped with a self-resetting fuse for extra protection.

The Vigitron Vi1032 is a 32-ch passive transceiver hub that transmits video over unshielded twisted pair (UTP) wires, point-to-point, for distances up to 1000 feet (305 m)*.  They are used with Vi1000 or VB1000 transceivers to support "up-the-coax" PTZ signals.

ComNet CNGE2MCPOEM 2 port ethernet media converter is designed to transmit and receive 10/100/1000 Mbps data over optical fibre through user selectable SFP modules. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 1000 Mbps. It is environmentally hardened to operate in extreme conditions. The LED indicators are provided for confirming equipment operating status.

ComNet CWFE2SCM2 ethernet media converter is designed to transmit and receive 10/100 Mbps data over multimode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The media converter is commercial grade for light industrial use.

The  comNet copperLine  CLFE(X)IPS model is 1RU high and can be easily installed in 19" racks.  This is ideal  for a wide range of cctV or It applications that require high power such as IP cameras, wireless access points or VoIP to be connected to a central LaN switching fabric with ease.

UTP / CAT 5 transmission, 1 channels, Telemetry Control, 1219, PAL / NTSC, 20 Hz ~ 6MHz , 70, 44, 25 x 71 x 41, 24 V AC, -10 ~ +50, 0 ~ 95

ComNet CNFE2MC ethernet media converter transmits and receives a single channel of Ethernet data over optical fibre through user selectable SFP options. The converter is environmentally hardened to operate in extreme temperatures. The electrical port supports Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.

ComNet FVR10M single mini video receiver detects an AM video signal on one multimode fibre optic cable. The receiver utilises Manual Gain Control and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is only available in stand-alone configurations.

ComNet CNFE1002M1A-A ethernet media converter transmits and receives 10/100 Mbps data over one multimode optical fibre. It is designed to be mounted within an Aigis dome and provide optical Ethernet connectivity. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The converter is environmentally hardened to operate in extreme temperatures. An LED indicator confirms equipment operating status.

ComNet FTA2C1M1 audio transmitter provides the transmission of two audio signals and one contact closure over one multimode optical fiber. The module uses 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio.

19" Twisted pair sender/receiver system up to 16 receiver / sender modules per 3HU rack. Quick and easy alignment. Pre-set adjustments via DIP-switch. LED display for output level. Galvanic decoupling of input signals. Seminal communication connection (I 2C-Bus) already integrated.

The Vigitron Vi1016 is a 16-ch passive transceiver hub that transmits video over unshielded twisted pair (UTP) wires, point-to-point, for distances up to 1000 feet (305 m)*.  They are used with Vi1000 or VB1000 transceivers to support "up-the-coax" PTZ signals.  These hubs use category 2-5 twisted pair wires and do not require power.

The Vigitron Vi1008is an 8-ch passive transceiver hub that transmits video over unshielded twisted pair (UTP) wires, point-to-point, for distances up to 1000 feet (305 m)*.  They are used with Vi1000 or VB1000 transceivers to support "up-the-coax" PTZ signals.

The Vi1216VPD is a passive transceiver device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV instalations in a structured wiring environment.  It supports up to 16 cameras for up to 750 feet and is designed to be installed in the control room.  The VI1216VPD receives low-voltage camera power from any third-party multioutput Class 2 power supply.  Each camera power output is equipped with a self-resetting fuse for extra protection.

Passive video transceiver, male BNC.

19" Twisted pair sender/receiver system up to 16 receiver / sender modules per 3HU rackQuick and easy alignmentPre-set adjustments via DIP-switchLED display for output levelGalvanic decoupling of input signalsSeminal communication connection (I 2C-Bus) already integrated  

Fibre Optic transmission, 4 channels, TX/RX, 4, 1, Digital, PAL, NTSC, 490, 128 x 35 x 190, < 6 W, 11 ~ 16 V DC, -40 ~ +74, 0 ~ 95, 1 Vpp, 75 Ohm

The Vigitron Vi6108 is an 8-port active receiver hub that receives high resolution colour or B&W video over unshielded twisted pair wires. Category 2-7 at distances up to 6,000 feet (1830 m) when used with Vigitron Vi6100VT Active Transmitter.  It can be used with any Vigitron passive transceiver for distances up to 3,500 feet (1060 m).

8 channels, 4 ~10 alarms, TX, Colour / Monochrome, 16 Kbps ~ 15 Mbps, MPEG-2, TCP/IP, UDP, RTP, ICMP, ART, NTP, SNMP, 25 Fps, PAL, NTSC, 440 x 44 x 195, 30 W, 85 ~ 264 V AC, 0 ~ 50, 8

ComNet FE2MC-B ethernet in-dome media converter transmits and receives 10/100 Mbps data over optical fibre through user selectable SFP options. The FE2MC-B electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The FE2MC-B is environmentally hardened to operate in extreme temperatures. It is designed to fit in the Bosch Gen 4 Dome Camera.

UTP / CAT 5 transmission, 1 Vp-p channels, 100, 300, 110 x 77 x 26, 0 ~ 55, 30 ~ 95, 75 Ohm

UTP / CAT 5 transmission, 16 channels, TX, 610 ~ 1219, PAL / NTSC, DC ~ 10, 620, 457 x 503, 110 ~ 220 V AC, -10 ~ +50, 0 ~ 95, 100

The ComNet™ FVR10C1(M,S)1 and FVR20C2(M,S)2 series dual-channel video receivers support the transmission of one or two independent short-haul quality 10-bit Digitally Encoded video signals and one or two contact closures in the direction of the video over two multimode or single mode optical fibers.