Analog Transmission Systems  (753)

One fiber Module Singlemode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

One fiber module multimode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

One fiber Module Singlemode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

One fiber Rack Card Singlemode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

ComNet FVT/FVR160D8S1 10 bit digitally encoded video transmission transmits 16 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR160D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

Converter HD-TVI, AHD, CVI, CVBS to HDMI, VGA, CVBS Display simultaneously HDMI, VGA and CVBS signal HD-TVI, AHD, CVI input: 720p@25/30/50/60Hz, 1080p@25/30Hz HDMI, VGA output: 480p, 576p,720p, 1080i,1080p CVBS output: PAL/NTSC Power LED, Link LED Built in OSD to display input/output setting PIP display under dual camera input mode

UTP / CAT 5 transmission, 4 channels, TX/RX, 228, PAL / NTSC, DC ~ 10, 60, 228 , 42 x 126 x 45, -10 ~ +70, 0 ~ 95

The ComNet™ Ethernet media converters are designed to transmit and receive 10/100 Mbps data over multimode or single mode optical fiber.

ComNet FVT412M1 video transmitter/data transceiver transmits four channels of video utilising state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data over one multimode optical fibre. The FVT412M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVR20C2S2 dual channel video/contact receiver supports transmission of two independent short-haul quality 10-bit digital video signals and two contact closures in the direction of the video over single mode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet FVT812M1 video transmitter/data transceiver transmits eight channels of video utilising state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one multimode optical fibre. The FVT812M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVT812S1 video transmitter/data transceiver transmits eight channels of video utilising state-of-the-art digital encoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode optical fibre. The FVT812M1 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Bi-Color LED indicators are provided to indicate the status of the system, video and data.

ComNet FVT/FVR320D8S1 video transmitter/receiver and data transceiver utilises 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. The unit provides transmission of 32 independent video channels and eight bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. The unit is universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.

UTP / CAT 5 transmission, 16 channels, TX/RX, 228, PAL / NTSC, DC ~ 10, 60, 788 , 42 x 457 x 503, -10 ~ +70, 0 ~ 95

ComNet CLFE1COAX is a 1 port coax ethernet extender that transmits individual Ethernet data channels with Pass-through Poe over standard coaxial cable. The extender extends Ethernet up to 1524 m over coaxial cable. The extender's high-data rate is ideal for the high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems, and cameras requiring jumbo frame transmission. The Symmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance.

ComNet FVR10C1M1 1 channel video/contact receiver supports transmission of one independent short-haul quality 10-bit digital video signals and one contact closures in the direction of the video over multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

ComNet FVTRM1B video receiver supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVTRS1A video transmitter supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one single mode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

Genie’s “Smart Cabling” Active Baluns are designed for use with Category 5e Unshielded Twisted Pair (UTP) cable. Each Transmitter and Receiver is supplied with a DC12V Power supply as standard and can transmit and receive full motion composite video signals up to 900 metres in Colour and 1800 metres in Monochrome.

ComNet FVT/FVR1014(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilise 10-bit digital encoding and decoding for high-quality video transmission. It meets the requirements of EIA RS-250C for short-haul video transmission. It provides transmission of one independent video channel and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. it is interchangeable between stand-alone or card mount configurations.

ComNet FDC10M1(A) contact closure transceiver provides bi-directional transmission of contact closure over one multimode optical fiber. The bi-directional contact closure module has two relay outputs and one relay input. One relay output follows the “relay input” at the remote end. When the remote “relay input” is shorted, the local relay output is closed and vice-versa. The second relay output is closed when “carrier” is detected from the remote end, this indicates that the optical fiber is connected and that the remote end has power and is operating.

ComNet FVT1001M1 video transmitter supports transmission of short-haul quality 10-bit digital video over one multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVT1001S1 video transmitter supports transmission of short-haul quality 10-bit digital video over one single mode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

ComNet FVTRM1A video transmitter supports transmission of short-haul quality 10-bit digital bi-directional video or sync over one multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit is interchangeable between stand-alone or card mount configurations.

ComNet FVT1S1/M mini video transmitter transmits one channel of video over one optical fiber. FVT1S1/M transmitter supports single-mode fibre. It is compatible with the FVR10C1(M,S)1, FVR20C2(M,S)2 and FVR40C4(M,S)4 series of receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The unit has a small footprint and is ideal for mounting where space is limited or can be mounted inside equipment housing.

ComNet CNFE2MC2C ethernet media converter transmits and receives 10/100 Mbps data and two bi-directional contact closures over multimode or single mode optical fibre using SFP modules to select distance and connector type. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The CNFE2MC2C media converters is environmentally hardened to operate in extreme temperatures.

The ComNet CopperLine CLFE(X)COAX Ethernet over COAX line consists of four models that supports100Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over standard 75Ω coaxial cable.

Rackmount housing or standalone.

Genie’s “Smart Cabling” Active Baluns are designed for use with Category 5e Unshielded Twisted Pair (UTP) cable. Each Transmitter and Receiver is supplied with a DC12V Power supply as standard and can transmit and receive full motion composite video signals up to 900 metres in Colour and 1800 metres in Monochrome.

ComNet FVT41M1 video transmitter transmits four channels of video over one optical fibre utilising state-of-the-art digital encoding and decoding for high-quality video transmission. The unit is ideal for use in unconditioned roadside or out-of-plant installations. The unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

Preferably unshielded twisted-pair cables should beused for the signal transmission.

The LTC 4641 Series Transmitters and LTC 4642 Series Receivers are designed for transmission of CCTV video signals.  Efficient installation is assured because there are no user adjustments required.  The wide bandwidth transmission capability of these units enables clear, sharp black and white or color pictures to be transmitted over long distances.  The compact transmitters are small enough to be connected directly to a camera’s BNC connector, thereby simplifying installation.

1 channels, 1, 100, 50 x 17,5 x 90, 125 mA, 11 ~ 17 VDC, -5 ~ +55

1 channels, 4, 100, 50 x 17.5 x 90, 150 mA, 11 ~ 17 V DC, -5 ~ +55

The versatile VAD 5300 series transceivers digitise and transmit one video signal while simultaneously handling two streams each of full-duplex data, contact closure and audio signals, all over one multimode or single-mode optical fibre.  The high-speed interfaces are suitable for RS-232/422/485, TTY, Manchester and biphase signals.  VAD 5310 model has MM fibre type and 1300/850 nm wavelength; VAD 5350 model has SM fibre type and 1310/1550 nm wavelength. All VAD 5300 equipment is SNM compatible.

UTP / CAT 5 transmission, 16 channels, TX/RX, Telemetry Control, 228 , PAL / NTSC, DC ~ 10, 60 , 795 , 457 x 42 x 45, 28 V AC, -10 ~ +50, 0 ~ 95

ComNet FVT/FVR40D4SFP optical video link provides transmission of four 10-bit medium-haul quality digital video channels and four bi-directional data channels through a selectable small form factor pluggable module (SFP). The data channels support RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-colour (Red/Green) LED indicators are provided for confirming operating status. This unit is interchangeable between stand-alone or card mount configurations.

The contact-mapping ComNet CNFE8(X)COE transmits eight contact closures over an Ethernet network. It is available with a 10/100TX RJ45 Ethernet connector and an SFP fiber optic interface. These units can be one-to-one mapped over Ethernet or controlled via a PC.

Designed to be completely transparent to all camera and monitor manufacturers. 2% Differential gain with 2 degree differential phase.

The DVBus 8050 series digital video multiplexers and demultiplexers transmit and receive from 16 up to 64 high-quality video signals over one single-mode fibre.  The DVBus 8050 is available for 16, 24, 32, 40, 48, 56 and 64 video channels.  The DVBus 8000 system is suited for environmentally harsh applications such as traffic monitoring, incident management, video surveillance in city centres, airport security, etc.  DVBus 8050 model has SM fibre type. All DVBus 8050 equipment is SNM compatible.