Analog Transmission Systems  (753)

Rack card Transmitter. Transmits high quality simultaneous bi-directional sensornet data on one multimode optical fiber.

Module video transmitter transmits one channel of high quality video on one multimode optical fiber. Designed to be completely tranparent to all camera and monitor manufacturers. I/O level is 1Vpp. 850nm Optical wavelength.

NiceVision NVSAT launched the concept of the Smart Video Server, created especially for distributed organisations.  It takes video from 2 to 8 cameras and encodes them for transmission across an IP network, making it ideal for outlying sites and clusters of cameras across large campuses.  NiceVision NVSAT makes CCTV monitoring smarter because it can be loaded with NiceVision video analysis applications, to make efficient use of network resources in response to detected threats.  The NiceVision NVSAT: transmits up to 8 channels of real-time, 4CIF video across IP networks combines codec, recording and video analysis in one compact unit automatically adapts resolution, frame-rate and bit-rate to detected security threatsNiceVision Alto offers proven video analysis and recording quality in a flexible, easy to configure package, and introduces complete level-of-service flexibility to the DVR market.  It allows users to optimize use of valuable video networking, processing and storage resources by automatically adjusting resolution, frame rate and picture quality according to schedules or in response to detected events.  Key features:stand-alone or fully networked DVR, 16 – 32 channels, 1TB integrated RAID full level-of-service control of resolution, frame-rate and bit-rate proven video analysis applications, MPEG4 main profile recording and networking

Rackmount housing or standalone.

Single receive module receiver multiplexes up to 8 channels of TTL and/or dry contact closure on one multimode optical fiber. A set of 8 LEDs on the transmitter and the receiver units indicated the channels in use.

Rack Card Dual video transmitter transmits two channels of high quality video on two multimode optical fibers. Designed to be completely tranparent to all camera and monitor manufacturers. I/O level is 1Vpp. 850nm Optical wavelength.

ComNet FVT/FVR401(M)(S)1 multiplexer simultaneously transmits four channels of video over one optical fiber utilising state-of-the-art 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. The unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems.

ComNet FVT/FVR414(M)(S)1 is a video transmitter/data transceiver and video receiver/data transceiver series that utilise digital encoding and decoding for high-quality video transmission. It provides transmission of four independent video channels and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. It is universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS-232, RS-422 and 2 or 4-wire RS-485 with tri-state support. It has a plug-and-play design that ensures ease of installation and no electrical or optical adjustments are ever required. Its bi-colour (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. It is interchangeable between stand-alone or card mount configurations.

ComNet FVT/FVR2001(M)(S)1 multiplexer simultaneously transmits two channels of video over one optical fiber utilising state-of-the-art 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. The unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems.

Module transmitter for video source transmits high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Module receiver for control site receives high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Rack Card transmitter for control site transmits high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Rack Card video transmitter transmits one channel of high quality video on one multimode optical fiber. Designed to be completely tranparent to all camera and monitor manufacturers. I/O level is 1Vpp. 850nm Optical wavelength.

ComNet FVT320D8S1 video transmitter / data transceiver utilises 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit provides transmission of 32 independent video channels and eight bi-directional data channels over one optical fibre and is ideal for use in unconditioned roadside or out-of-plant installations. FVT320D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

Module transmitter for video source transmits high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Module receiver for control site receives high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

The ComNet™ FVT/FVR1031 series video transmitter/ receiver and data transceiver supports simultaneous transmission of short-haul quality 10-bit digitally encoded video or bi-directional data over one multimode or single mode optical fibre. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most major data protocols.

ComNet FVT/FVR8012(M,S)1 10-bit digitally encoded video transmission transmits eight channels of video utilizing state of the art 10-bit digital encoding and decoding for very high quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode or multimode optical fiber. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The unit is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485 (2 & 4 Wire) data.

ComNet FVT/FVR8018(M)(S)1 10-bit digitally encoded video transmission transmits eight channels of 10-Bit Digital Video along with eight channels of bi-directional data over one single mode or multimode optical fiber. The video quality exceeds RS-250C for short-haul video transmission. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The unit is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and RS485 (2 & 4 Wire) data.

Rack Card receiver for control site receives high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Rack Card transmitter for control site transmits high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Two fiber module multimode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

Rack Card receiver for control site receives high quality, simultaneous video and bi-directional Sensornet data on one multimode optical fiber.

Reliable, secure communications in the 4.9 GHz band. Capable of being deployed in both point-to-point and point-to-multipoint configurations, and able to co-exist with other systems in mixed spectrum architectures, the ultra-flexibility of the 4900 enables each network to be tailored in its configuration to efficiently handle a multitude of applications.Provides secure and reliable connectivity in any terrain, environment and climate, the BreezeACCESS 4900 is well suited for voice, video and data applications in combining FIPS-197 government approved (AES-based) encryption, advanced quality of service (QoS) and high throughput speeds.

Video Distributor for HD analogue signals 1 signal input to 4 signal outputs Supported formats HD-TVI, AHD, HDCVI, CVBS High resolutions of up to 4K are supported

ComNet FVT/FVR120D8(M)(S)1 10 bit digitally encoded video transmission transmits 12 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR120D8(M)(S)1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

One fiber module multimode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

The ComNet CopperLine CLFE(X)UTP Ethernet over UTP line consists of four models that support 100Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over twisted pair cable (CAT5, UTP).

Alvarion BreezeMAX Wi2 converged network serving mobile Wi-Fi users using WiMAX/pre-WiMAX networks yielding significant installation and operations savings. Rich set of secure differentiated service levels enabling Intranet, public access, and homeland security applications over one network. Migration path to a 802.16e Mobile WiMAX network. BreezeMAX Wi2 supports WiMAX / pre-WiMAX operation in 2.X, 3.X and 5.X GHz. Rich features including end-to-end QoS, virtual AP, VLAN and VLAN mapping, and 802.11i and 802.1x security. Comprehensive full solution combining BreezeACCESS VL or BreezeMAX for backhauling with a robust high power and feature rich Wi-Fi 802.11 b/g access poin. Standard Interface: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.11 b, g. Maximum Clients: 128 for the radio interface set to access point mode. Network Management: Web-management, Telnet, SNMP.

ComNet FVT/FVR8014(M)(S)1 10-bit digitally encoded video transmission transmits eight channels of 10-Bit Digital Video along with four channels of bi-directional data over one single mode or multimode optical fiber. The video quality exceeds RS-250C for medium-haul video transmission. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The unit is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and RS485 (2 & 4 Wire) data.

ComNet FVT/FVR240D8S1 10 bit digitally encoded video transmission transmits 24 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR240D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

ComNet FVT/FVR280D8S1 10 bit digitally encoded video transmission transmits 28 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR280D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

One fiber Rack Card multimode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

One fiber Rack Card Singlemode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

ComNet FVR40C4M4 4 channel video/contact receiver supports transmission of four independent short-haul quality 10-bit digital video signals and four contact closures in the direction of the video over multimode optical fibre. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. The unit may be either wall or rack-mounted.

EVT-250 Transmitter unit, Euroboard size for installation in the Ernitec RVU 200 Rack Frame.  EVR-250 Receiver unit, Euroboard size for installation in the Ernitec RVU 200 Rack Frame.

Two fiber Rack card multimode with ST connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

ComNet FVT200D8S1 video transmitter/data transceiver transmits 20 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT200D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

Two fiber module Rack card with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.

One fiber Rack Card multimode with SC connectors. Transmits and receives 10Base-T or 100Base-TX over optical fiber. Comprised of 2 tranceivers forming a point to point communications link. Designed to be completely transparent with auto negotiate features. 10.100 Mbs Data rate. Half/Full Duplex fibers.