Analog Transmission Systems  (753)

ComNet CNFEVCNMCM multimode ethernet in-dome electrical to optical media converter transmits and receives 10/100 Mbps data over one multimode or optical fibre with ST connectors. The CNFEVCNMCM electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The CNFEVCNMCM is environmentally hardened to operate in extreme temperatures. The LED indicators are provided for confirming equipment operating status. It is designed to fit in the VIcon Surveyor Dome Camera.

ComNet FVTXA2C1M bi-directional audio transmitter provides transmission of two bi-directional audio signals and one bi-directional contact closure over one multimode or optical fiber. The module uses 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio.

Fibre Optic transmission, 4 channels, TX/RX, 4, 1, Digital, PAL, NTSC, 490, 128 x 35 x 190, < 6 W, 11 ~ 16 V DC, -40 ~ +74, 0 ~ 95, 1 Vpp, 75 Ohm

The ComNet™ FVT/FVR412(M)(S)1 Series transmits four (4) channels of video utilizing state of the art digital encoding and decoding for high-quality video transmission, along with two (2) channels of bi-directional data and one (1) bi-directional contact closure over one single mode or multimode optical fiber.

The Vigitron Vi1001P is a passive transmission device that transports video and/or PTZ (pan/tilt/zoom) signals over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet* (305 m).  Distances up to 3000 feet (915 m) can be achieved when it is used with Vigitron active UTP receivers.  It uses Category 2-7 twisted pair wires, is easy to install and cost effective, and does not require power.  The Vi1001P's unique and compact design allows mounting directly to the video source or receiver without any additional cabling.  The Vi1001P is compatible with all qualified cameras with built-in twisted pair transmitter.

UTP / CAT 5 transmission, 4 channels, RX, Colour / Monochrome, PAL, NTSC, 70, 100, 45 x 115 x 25, 12 ~ 24 V AC / V DC, -20 ~ +50, 0 ~ 95

The Proxim Tsunami® QB-62000 comes in an all ODU package that is the smallest in the market at 7x7 inches. Coupled with the widespread availability around the globe due to its use of the license exempt 60GHz band, this means the Tsunami® QB-62000 can be deployed almost anywhere within hours. High Performance The Tsunami® QB 62000 is a high capacity, point-to-point (PtP) wireless backhaul solution. The Tsunami® QB 62000 delivers throughput of 1Gbps Full Duplex. Perfect Range for Pico Cells Implementing a robust modulation scheme allows the Tsunami® QB 62000 to cover up to 1km at full throughputs. Smallest Footprint The Tsunami® QB 62000, weighing only 5.5lbs, uses state of the art components to reduce the size of the device to 7x7 inches. Cost-Effective Tsunami® QB 62000 is a cost optimised high performance wireless bridge in a compact form factor ideal for pico cell backhaul applications. Ease of Installation Extremely light weight and small wind loading, the Tsunami® QB 62000 is able to be installed almost anywhere - light poles, monopoles, and more. Centralised Management Our ProximVision ES centralized network management system can easily configure and monitor the QB 62000 remotely from a PC in your command centre.

UTP / CAT 5 transmission, 4 channels, RX, Colour / Monochrome, PAL, NTSC, 70, 100, 23 x 45 x 124, 12 ~ 24 VDC/VAC, -10 ~ +50, 0 ~ 95

ComNet FDC80TM1 contact closure transmitter provides transmission of up to eight independent supervised dry switch or relay contact closures over a single optical fiber, or any two-wire RS-485 copper circuit. Microprocessor-based logic transmits the contact closure information in packets that are ordered and encoded, ensuring extremely robust and reliable transmission.

ComNet FDC8TM1 8-channel contact closure transmitter's Microprocessor-based logic detects a customer-furnished switch or contact closure, and encodes the closure into robust data packets that are mapped and transmitted to the FDC8NLR Receiver. The FDC8TM1 features plug-and-play design that ensures ease of installation and operation, and no optical or electrical adjustments are ever required.

The MultiGain Wireless (MGW) is a field proven point-to-multipoint Fixed Wireless Access (FWA) solution. The MGW enables the fast and cost effective implementation of high quality communication services for both incumbent and Competitive Local Exchange Carriers (ILEC/CLEC) worldwide. In urban, suburban and rural environments, the MGW dependably supports a variety of services including toll quality voice, highspeed Voice Band Data (VBD) and ISDN-BRI.The modular and flexible architecture of the MGW guarantees extremely fast deployment, regardless of the topography. The systems scalability enables low initial investment, with further capital outlay matching network growth and subscriber demand. Combining advanced Frequency Hopping CDMA technology with an innovative blend of space and time diversity techniques, the MGW delivers the highest level of spectrum utilisation and exceptional communication immunity against environmental interference. Furthermore, the MGW Coverage eXtender (MCX) offers excellent utilisation of E1 transmission media. The MGW meets regulatory and operational requirements with a wide range of frequency bands (800MHz to 3.8GHz) and supports standard analog and digital interfaces (V5.2 or TR-008). The MGW system is supported by both FWA network planning tools and comprehensive management and control tools, providing a complete package to answer any operator's needs.  

The ComNet Ethernet media converters are designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options. The CNFE2MC[AC][/M] transmits and receives a single channel of Ethernet data and the CNFE22MC transmits and receives two independent channels in one unit. Both are environmentally hardened to operate in extreme temperatures.

The ComNet CLFE4US1TPC is an unmanaged switch that combines four individual Ethernet data channels over a single standard COAX or UTP cable.

The Vigitron  VB1001M is a passive transmission device with male BNC that transports video or PTZ (pan/tilt/zoom) signals over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet* (305m).  Distances up to 3000 feet (1000m) can be achieved when it is used with Vigitron active UTP receivers.  They use category 2-5 twisted pair wires and do not require power.  Their design allows mounting directly to the video source or receiver without additional cabling.  The VB1001M is compatible with all qualified cameras with a built-in twisted pair transmitters.

LTC 4744 series 4-channel video transmitters; for use with LTC 4745 series receiver.  Optical budget 17dB.  Wavelength: 1310nm.  Optical emitter: laser diode.  8-bit digital video encoding.  Rack-mount version.  Differential gain: < 2%; differential phase: < 0.7°.  Signal to noise ratio: 60 dB @ maximum optical loss budget.  MTBF: > 100,000 hours.   

ComNet FDC8T(M)1 8-channel contact closure transmitter provides transmission of up to eight independent contact closures over one RS232 link or optical fiber. Microprocessor-based logic sends the contact information in packets that are ordered and encoded, ensuring extremely robust transmission.

ComNet COMPAK1EOC contains two CNFE1EOC-M modems that support Ethernet over twisted pair or coaxial cable, at data rates of up to 90 Mbps. Ethernet data may be transmitted over a telephone-grade twisted copper pair, legacy serial cabling, or standard 75 ohm coaxial cable circuits, making this unit ideal for those applications where it is desired to utilise an existing installed base of copper wiring for Ethernet transmission.

ComNet CLFE8IPS is a 8 port high-power PoE mid-span injector. It is compatible with 10/100/1000 BaseT Ethernet networks. The injector meets IEEE 802.3af and IEEE 802.3at standards and deliver up to 37W per port simultaneously on all ports without requiring power management. The PoE function can be set up with Windows GUI or use the default plug and play option. This mid-span power injector is equipped with LEDs to provide operational status.

ComNet FDC8ISOTM1 contact closure transmitter provides up to eight independent normally-open (NO) dry contact closures over one multimode optical fiber, when used in conjunction with the companion ComNet model FDC8NLR Non-Latching Receiver or FDC8R Latching Receiver units. Each of the contact closure inputs are optically isolated at 1500V to ground, for those applications where high stray or transient voltages may exist.

The Vi6208 is an advanced 8 port active receiver hub that features Vigitron’s new Automatic Video Compensation (AVC) technology. AVC incorporates a sophisticated microprocessor controlled analog circuit that continuously analyses incoming video signal and compensates for cable attenuation independent of video signal content.

The Vi6308 is an advanced 8 port active receiver hub that features Vigitron’s new Automatic Video Compensation (AVC) technology. AVC incorporates a sophisticated microprocessor controlled analogue circuit that continuously analyses incoming video signal and compensates for cable attenuation independent of video signal content.

ComNet CNFE2MCPOEM mini ethernet media converter with PoE is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP modules. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. It is environmentally hardened to operate in extreme conditions.

It's certainly safe to say that fibre optics is ubiquitous in telecommunications around the world; anyone who's ever used the Internet or a telephone has probably taken advantage of fibre optic cables and the technology inherent therein. Moreover, no other medium offers the unwavering quality that fibre does for sending data over long distances. Therefore, it's no wonder that many take advantage of the extensive network of existing fibre wires already connecting most of the planet as they design and implement security systems.Yet, transmitting video over vast distances requires reliable equipment to regulate streams, especially when safety and security are concerned. That's why Siqura® Surveillance Solutions offers one of the largest assortments of fibre optic equipment in the world for both point-to-point and optical add/drop CWDM configurations. Since Siqura is determined to ensure optimal performance whenever and wherever it's needed, all of the Siqura fibre products are field-hardened to withstand the harshest conditions and most extreme temperatures. Moreover, Siqura offers the most compact fibre solutions available anywhere. Siqura is also committed to providing complete surveillance solutions and therefore offers fibre optic devices that support fibre to IP transitions, making it easy to use them in hybrid networks. Additionally, Siqura wants to make safety and security easy and accessible to everyone, so each Siqura fibre product is adjustment-free and hot-swappable. The UTF fibre models also include Easy-C™, a group of receivers that only use one external data connection, which simplifies configuration and maintenance, for example, for PTZ connections. Furthermore, Siqura codecs offer an optional SFP connector, so creating a complete solution using both Siqura fibre and codec devices is advantageously clear-cut. With a comprehensive five year warranty from a company with over 35 years experience and a network management interface for remote device health monitoring, you can rest assured that your Siqura solution will last you long into the future. 

The Vigitron VB1001F is a passive transmission device with female BNC that transports video or PTZ (pan/tilt/zoom) signals over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet* (305m).  Distances up to 3000 feet (1000m) can be achieved when it is used with Vigitron active UTP receivers.  They use category 2-5 twisted pair wires and do not require power.  Their design allows mounting directly to the video source or receiver without additional cabling.  The VB1001F is compatible with all qualified cameras with a built-in twisted pair transmitters.

Vigitron is a leading manufacturer of extended distance transmission solutions. Our newly released IP network series transmits data and PoE power, including PoE 802.3af and extended PoE ++ over distances of up to 1515 meters. Vigitron conducts strict product testing to various industry standards assuring you of performance. Data and packet losses are tested to RFC2544 in addition to individual camera manufacturer standards. Environmental testing is conducted to NEMA-TS2 temperature testing operating from -40 degrees C to + 75 degrees C. Vigitron's quality has been provided with the world's leading camera manufacturers and provides a complete product line of extended IP transmission over Ethernet and Coax with single and multiple channel solutions. Vigitron's performance is based on several of the company's unique technologies, including Symmetric Bandwidth (SBW™), Virtual Zero Packet Loss (VZPL™) and Pass Through PoE (PTP™), the latter eliminating the need for individual transceiver and camera power supplies and local site power outlet requirements.  Vigitron products are designed for high reliability in addition to significantly lower installation costs. Click on this link to download a whitepaper to learn more about extended transmission.

The ComNet™ FDX60(M)(S)(-M) data transceiver provides point-to-point transmission of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one or two optical fibers. The transceiver is transparent to data encoding allowing for broad-range compatibility.

UTP / CAT 5 transmission, 1 channels, Telemetry Control, PAL / NTSC, 60, 25 , 38 x 71 x 20, 12 V DC , -10 ~ +70, 0 ~ 95

UTP / CAT 5 transmission, TX/RX, 305, PAL, NTSC, 60, 20, 32 x 24 x 14, -10 ~ +70, 0 ~ 95

The ComNet™ FVT/FVR812(M)(S)1 Series transmits eight (8) channels of video utilizing state of the art digital encoding and decoding for high-quality video transmission, along with two (2) channels of bi-directional data and one (1) bi-directional contact closure over one single mode or multimode optical fiber. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The FVT/FVR812 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and 485-2/4W data.

Vigitron's Vi1516VPD is a passive transceiver device that also combines video, PTZ data and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 16 cameras for up to 750 feet and is designed to be installed in the control room. The Vi1516VPD has a 16-channel, fully isoplated class II built-in 28/24 VAC power supply. Each camera power output is equipped with a 2 A glass fuse accessible from front panel for extra protection. Features include: Supports up to 16 cameras by providing Video, class IIPower and Data on a single Cat-5cable per camera for up to 750 feet (230m) Built-in passive transceivers with surge protection 16 isolated camera power individually selectable 24 or 28 VAC at 1 A max per channel, 12 A aggregated A glass fuse per channel, accessible from front panel Use with the Vi1053VPD transceiver at the camera Power present and fault indicator LEDs for each camera 60 dB cross talk and noise suppression on video signals 19", low profile 1U wall or rack-mountable 1U high wall or rack-mountable, 12" deep Cooling fans with temperature control Designed for structured wiring applications Limited lifetime warranty

ComNet CKFE1UTP ethernet over UTP/twisted pair extender consists of two single channel units in a single package containing cables and power supplies. It supports 100Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over twisted pair cable (Cat5, UTP). CKFE1UTP supports transmission distances of up to 3,000 feet (914m) at 10 Mbps, or 2,100 feet (640m) at 100 Mbps.

The Vi1508VPD is a passive transceiver device that also combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment.  It supports up to 16 cameras for up to 750 feet and is designed to be installed in the control room.  The Vi1508VPD has an 8-ch fully isolated class II built-in 28/24 VAC power supply.  Each camera power output is equipped with a 2A glass fuse accessable from front panel for extra protection.

The Vi6232 is an advanced 32 port active receiver hub that features Vigitron’s new Automatic Video Compensation (AVC) technology. AVC incorporates a sophisticated microprocessor controlled analogue circuit that continuously analyses incoming video signal and compensates for cable attenuation independent of video signal content.

1 channels, TX/RX, 1, Colour / Monochrome, MPEG-2, MPEG-4, TCP/IP, UDP, RTP, IGMP, ICMP, ARP, NTP, SNMP, 25 Fps, PAL, NTSC, 480 x 132 x 195, 10 W, 85 ~ 264 V AC, 0 ~ 50

The LTC 4671 Series are Transceivers designed especially for the transmission of RS-485 signals used by system keyboards in the Allegiant Series of switcher/ controller systems, the Divar Series of digital video recorders, and the System4 Series of multiplexers.  The unit contains both a transmitter and a receiver operating in the 850 nm range to allow bidirectional communication using two fibers between the main control site and its remote keyboard.

Vigitron, Inc. has introduced UTP active receiver hubs with automatic video compensation (AVC). The units can transmit and receive video images over UTP cable through mid range (1,200 metres) to long range (2,000 metres) at a price that is affordable for installers and end-users. Integrators can fit a Vi6300VT active transmitter at the camera in the knowledge that a Vi6200 series hub in the site control room will automatically compensate for video loss up to 1,200 metres. Similarly, the Vi6300 series provides excellent image quality up to 2,000 metres. The receivers do not require any adjustment to give optimum pictures. The new Vigitron models fit in a standard 19-inch (48 cm) rack and are supplied with rack mounting kits and a full set of interconnecting cables. UK and European based integrators and distributors will appreciate that the equipment is uniquely designed for the PAL video standard and is fully compatible with other worldwide video standards NTSC and SECAM. The units' immunity to noisy crosstalk and interference (70 dB) is among the best in the industry and there is built-in ground loop isolation to remove damaging hum bars and distorting ground loops. Engineers will also benefit from compatibility with qualified UTP built-in cameras, any passive transmitters and the smallest video transmitter in the world, the Vi1003M. There are video-present diagnostic LED indicators for each channel and the connectivity options (screw terminal or RJ-45 connector) complement Vigitron's extensive line of video-power-data transmission equipment.

The Vigitron Vi6116 is an advanced 16 port active receiver hub that receives high resolution colour or black and white video over unshielded twisted pair Category 2-7, at distances up to 6,000 ft. (1,830 m) when used with a Vigitron Vi6100VT Active Transmitter. It can receive video signals from any Vigitron passive transceiver for distances up to 3,000 ft. (915 m).

Alvarion BreezeACCESS Wi2 supports WiMAX/pre-WiMAX operation in 2.X, 3.X and 5.X GHz. Integrates new technologies such as 802.16e. Rich features including end-to-end QoS, virtual AP, VLAN and VLAN mapping, and 802.11i and 802.1x security. Comprehensive full solution combining BreezeACCESS VL or BreezeMAX for backhauling with a robust high power and feature rich Wi-Fi 802.11 b/g access poin. Standard Interface: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.11 b, g. Maximum Clients: 128 for the radio interface set to access point mode. Network Management: Web-management, Telnet, SNMP.

Tsunami® QB 8250 Link, 300 Mbps, MIMO 2x2, 23 dBi Integrated Antenna (Two QB-8250-EPR)

The Vi1416VPD is a device that combines video, PTZ data and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment.  It supports up to 16 cameras and is designed to be placed at a location between the cameras and control room to extend the video up to 3,000 feet.  The Vi1416VPD has a 16-ch fully isolated class II built-in 28/24 VAC power supply.  Each camera power output is equipped with a glass fuse for extra protection.  All fuses are accessable from front.